Filter
Top Products
TABLETOP SOLUTIONS
400-0434-003 3
ABOUT YOUR Tilt 'N Plug Jr. 2
All Tilt ‘N Plug Jr.’s belong to a family of compact
interconnection solutions designed for installation
into a table as part of a presentation system. They
are designed for mounting into a table, podium, or
other furniture to provide a way of connecting
audiovisual equipment on top of the furniture to a
presentation system below the furniture.
All use the same core element; a multimedia input
plate that can be "tilted" open when needed and
pushed closed when not needed.
The TNP122 and TNP142 each incorporate two
Tilt ‘N Plug Jr. modules and can be operated
independently. The TNP142 is the same as a
TNP122, but with the modules factory-installed
facing in opposite directions. The TNP131 is the
same as a TNP121, but with a round bezel instead
of a square bezel.
All signals pass through the input plate directly to
cables on the underside of the table with no
intervening circuitry. The use of additional
ALTINEX Signal Management Solutions
®
such as
computer video interfaces, distribution amplifiers,
and switchers may be desirable.
The input plate of the Tilt ‘N Plug Jr. is accessible
by pushing down on the top cover. The unit then
auto-tilts open with help from an internal pneumatic
spring. Once open, the input plate remains
securely in place. The input plate is hidden by
pressing down on the top cover until the latching
mechanism engages. In its closed position, the top
panel lies flush with the table’s top, held in place by
the latching mechanism.
All Tilt ‘N Plug Jr. Signal Management Solutions
come with a standard top and bezel offering a high
quality matte black finish. Other finishes or special
bezel configurations are available upon request.
Please contact an ALTINEX representative to
discuss custom options.
TECHNICAL SPECIFICATIONS 3
MECHANICAL
TNP121/121C/
131/151/151C
Max Table Thickness 2.25 in (57 mm)
Height, opened 5.50 in. (140 mm)
Width (TNP121/151)
Diameter (TNP131)
4.60 in. (117 mm)
5.75 in. (146 mm)
Depth (TNP121/151) 4.90 in. (124.5 mm)
Finish Matte Black
T° Operating (T° Max) 10°C-35°C (40°C)
Humidity
90% non-condensing
Table 1 TNP121/131/151 Mechanical
MECHANICAL TNP122/142
Width 8.70 in. (221 mm)
Height, opened 5.50 in. (140 mm)
Depth 4.90 in. (124.5 mm)
Finish Matte Black
T° Operating 10°C-35°C
T° Maximum 40°C
Humidity
90% non-condensing
Table 2 TNP122/142 Mechanical
ELECTRICAL
(Single outlet panel)
TNP121/121C/
122/131/142
Power Rating
(pass-through AC power)
110VAC, 60Hz,
5A per connector
Table 4 TNP121/121C/122/131/142 Electrical
ELECTRICAL
(Dual outlet panel)
TNP151 and
TNP151C
Power Rating
(pass-through AC power)
110VAC, 60Hz,
2.5A per connector
Table 5. TNP151/151C Electrical
NOTE: Specifications are subject to change. See
the ALTINEX website at www.altinex.com
for the most up-to-date information.