GA-K8N Ultra-9 Motherboard - 36 -
English
2-3 Integrated Peripherals
On-Chip IDE Channel0
Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.
On-Chip IDE Channel1
Enabled Enable onboard 2nd channel IDE port. (Default value)
Disabled Disable onboard 2nd channel IDE port.
IDE DMA transfer access
Enabled Enable IDE DMA transfer access. (Default Value)
Disabled Disable IDE DMA transfer access.
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Integrated Peripherals
On-Chip IDE Channel0 [Enabled]
On-Chip IDE Channel1 [Enabled]
IDE DMA transfer access [Enabled]
On-Chip MAC Lan [Auto]
On-Chip LAN BOOT ROM [Enabled]
IDE/SATA RAID function [Enabled]
IDE Primary Master RAID [Disabled]
IDE Primary Slave RAID [Disabled]
IDE Secndry Master RAID [Disabled]
IDE Secndry Slave RAID [Disabled]
Serial-ATA 1 [Enabled]
SATA 1 Primary RAID [Enabled]
SATA 1 Secondary RAID [Enabled]
Serial-ATA 2 [Enabled]
SATA 2 Primary RAID [Enabled]
SATA 2 Secondary RAID [Enabled]
IDE Prefetch Mode [Enabled]
On-Chip USB [V1.1+V2.0]
USB Memory Type [SHADOW]
Item Help
Menu Level`
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Integrated Peripherals
Item Help
Menu Level`
OnBoard LAN Boot ROM [Disabled]
SATA RAID-5 Function [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard IrDA Port [2F8/IRQ3]
Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]
x ECP Mode Use DMA 3
CIR Port Address [Disabled]
x CIR Port IRQ 11
KLJI: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F7: Optimized Defaults
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
AC97 Audio [Auto]
Onboard 1394 [Enabled]
Onboard LAN control [Enabled]