Filter
Top Products
Appendix- 71 -
English
Step 3:
If Setup correctly recognizes the driver in the floppy disk, a controller menu similar to Figure 15 below
will appear. Use the ARROW keys to select NVIDIA RAID CLASS DRIVER (Figure 15) and press
ENTER. Later, when a screen similar to Figure 16 appears, you must press S to select additional
driver. The screen will return to previous screen as shown in Figure 15. Select NVIDIA nForce
Storage Controller and press ENTER.
Figure 15
Figure 16
Windows Setup
S=Specify Additional Device Enter=Continue F3=Exit
Setup will load support for the following mass storage device(s):
NVIDIA RAID CLASS DRIVER (required)
* To specify additional SCSI adapters, CD-ROM drives, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
If a message appears saying one or some file(s) cannot be found, please check the floppy disk
or copy the correct SATA driver again from the motherboard driver CD.
Windows Setup
ENTER=Select F3=Exit
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
NVIDIA RAID CLASS DRIVER (required)
NVIDIA nForce Storage Controller (required)