Filter
Top Products
32 PCM-5820 Series User's Manual
3.1 Introduction
The PCM-5820 Series system BIOS and custom drivers are located in
a 256 KB, 32-pin Flash ROM device, designated U14. A single Flash
chip holds the system BIOS and VGA BIOS. The display type can be
configured via software. This method minimizes the number of chips
and eases configuration. You can change the display BIOS simply by
reprogramming the Flash chip.
3.2 Utility CD disk
The PCM-5820 Series is supplied with a software utility on CD-ROM.
This disk contains the necessary file for setting up the VGA display.
Directories and files on the disk are as follows:
Figure 3-1: Contents of the PCM-5820 Series utility disk
AWDFLASH.EXE
This program allows you to update the BIOS Flash ROM.
5820V110.BIN
This binary file contains the system BIOS.
CBROM.EXE
This program allows you to combine your own VGA BIOS with
system BIOS (5820V110.BIN).
RSET8139.EXE
This program enables you to view the current Ethernet configuration,
reconfigure the Ethernet interface (medium type, etc.), and execute
useful diagnostic functions.
AWDFLASH.EXE
CBROM.EXE
RSET8139.EXE
5822Vxxx.BIN