Ameriphone VCO Server User Manual


 
Setting up Your
Dialogue VCO (continued)
3. Lift the handset and listen for a
dial tone.
The phone is ready to use.
W
all Mount:
1. Pull the handset hook out as
shown in Figure 5 and reverse
its position so that the hook
points up and will hold the
handset when you hang up.
2. Insert the tabs of the phone
base into the slots in the lower
position of the base as shown
in Figure 6. Push the phone
base in and down firmly until it
snaps into place.
3. Plug in the short phone line
cord and mount the phone as
shown in Figure 7.
4. See Desktop Use section and
follow steps 1 through 3.
M
A
NUAL
AUTO
Figure 6 - Phone Base Installation
for Wall Mounting
Figure 5 - Reversing the Hook
Figure 7 - Wall mounting installation
5