Filter
Top Products
46 User's Guide Fastmark 6000 Series
PS/2 Keyboard I/F
The special keyboard interface connector is available on the FM6000 series printers. This
is for PS/2 keyboard or barcode reader with keyboard wedge. When this interface is
used, using the Centronics or RS-232 communication ports is discouraged. Use of the
PS/2 keyboard interface may only be operated in stand-alone mode.
The printer can automatically detect the keyboard. But if you use a barcode reader you
should set switches 6, 7 and 8 to the ON positions.
Before a keyboard or a barcode reader is connected make sure that the printer is set for
the following configuration.
- Make sure the desired form is download to the printer.
- Make sure that a PS/2 keyboard or barcode reader with KB wedge is available.
(Refer to the Appendix for Stand-Alone Operation for further information.)