Filter
Top Products
TABLE 3: OUTPUT CAPACITY AND REGULATION
Output
Voltage
Load Max.
Regulation
Ripple & Noise
+3.3V
16A
±5%
40mV
+5V
16A
±5%
40mV
+12V
1
18A
±5%
80mV
+12V
2
18A
±5%
80mV
–12V
0.3A
±10%
120mV
+5Vsb
2.5A
±5%
40mV
The continuous maximum total output power shall not exceed 350W.
+12V
1
and +12V
2
DC maximum output power shall not exceed 330W.
+3.3V and +5V DC maximum combined output power shall not exceed 105W.
INSTALLATION:
1. Install the EA-350 Green PSU into your case with the four screws provided.
2. Connect the 24-pin main power connector to your motherboard. If your motherboard
uses a 20-pin connector, detach the 4-pin attachment on the 24-pin connector.
Note: The detachable 4-pin section cannot be used in place of a 4-pin +12V connector.