AOC 916VWA Computer Monitor User Manual


 
the video card output connector on the back of your computer.
Picture Bounces, Flickers Or Wave Pattern Is
Present In The Picture
Move electrical devices that may cause electrical interference as far away from the monitor as possible.
Use the maximum refresh rate your monitor is capable of at the resolution your are using.
Monitor Is Stuck In Active Off-Mode"
The Computer Power Switch should be in the ON position.
The Computer Video Card should be snugly seated in its slot.
Make sure the monitor's video cable is properly connected to the computer.
Inspect the monitor's video cable and make sure none of the pins are bent.
Make sure your computer is operational by hitting the CAPS LOCK key on the keyboard while observing the
CAPS LOCK LED. The LED should either turn ON or OFF after hitting the CAPS LOCK key.
Missing one of the primary colors (RED,
GREEN, or BLUE)
Inspect the monitor's video cable and make sure that none of the pins arebent.
Make sure the monitor's video cable is properly connected to the computer.
Screen image is not centered or sized properly
Adjust H-Position and V-Position or press hot-key (AUTO).
Picture has color defects (white does not look
white)
Adjust RGB color or select color temperature
Horizontal or vertical disturbances on the
screen
Use win 95/98 shut-down mode Adjust CLOCK and FOCUS or perform hot-key (AUTO-key )
7. Product Information
Specifications
Model number 916Vwa
Driving system TFT Color LCD
Size 48.0cm ( 19" 16:10)
Pixel pitch 0.285mm(H) x 0.285mm(V)
Video R, G, B Analog lnterface ,DVI
Separate Sync. H/V TTL
Display Color 16.2 million Colors
LCD Panel
Dot Clock 135 MHz
Horizontal scan range 31 kHz - 80 KHz
Horizontal scan
Size(Maximum)
410.4mm
Vertical scan range 55 Hz - 75 Hz
Vertical scan Size(Maximum) 256.5mm
Optimal preset resolution 1440 x 900 (60 Hz)
Highest preset resolution 1440 x 900 (75 Hz)
Plug & Play VESA DDC2B/CI
Resolution
Input Connector D-Sub 15pin ,DVI