Filter
Top Products
iii
circuit parts causing a fire or electric shock. Never spill liquids on the
monitor.
• Do not attempt to service the monitor by yourself. Opening or removing
covers can expose you to dangerous voltages and other hazards. Please
refer all servicing to qualified service personnel.
• Do not pull or bend the power cable and signal cable or place the monitor or
any heavy objects on the cables. If the cables are damaged, they may cause
fire or electric shock.
• If you notice any abnormal phenomenon such as strange noise, smoke or
smells, unplug the monitor and contact your dealer or the nearest service
center immediately.
• When moving the monitor, always turn off the switch, unplug the monitor,
and disconnect the signal cable. If the cables are not properly disconnected
when moving the monitor, it may cause fire or electric shock.
• Do not touch the plug with wet hands. Pulling or inserting the plug with wet
hands may cause electric shock.
• To disconnect the power cable or signal cable, always pull the cable by the
plug. Never pull on the cable as this may cause fire or electric shock.
• To ensure satisfactory operation, use the monitor only with UL listed
computers which have appropriate configured receptacles marked between
100 - 240V AC, Min. 5A.
• The wall socket shall be installed near the equipment and shall be easily
accessible.
ERGONOMICS RECOMMENDATIONS
Do not operate the monitor in a dark room or against a bright background. For optimal
viewing comfort, the monitor should be just below eye level and 30-60 cm (16-24 inches)
away from your eyes. When using the monitor over a prolonged period of time, a
ten-minute-break per hour is recommended.