Filter
Top Products
iv
GENERAL NOTES
The following symptoms are normal with LCD monitor and do not indicate a problem.
• Due to the nature of the fluorescent light, the screen may flicker during initial
use. Turn off the Power Switch and then turn it on again to make sure the
flicker disappears.
• You may find slightly uneven brightness on the screen depending on the
desktop pattern you use.
• The LCD panel used in this monitor is a very high technology product with
3,932,160 thin film transistors giving you fine picture details. Occasionally, a
few non-active pixels may appear on the screen as a fixed point of red,
green, blue, white or black. Please note that this does not indicate a
defective panel.
• Due to the nature of the LCD screen, an after-image of the previous screen
may remain after switching the image when the same image has been
displayed for a long time. The monitor will slowly recover from this.
• LCD monitors have a fixed size & number of pixels. Due to this, an
interpolation is necessary to operate the monitor in a resolution below its
native resolution which may slightly de-grade the display quality. Therefore,
it is highly recommended to operate this monitor at its native resolution of
1280x1024 @ 60Hz.