APC 6000 Network Router User Manual


 
6739389EN/FB - Page 5
Communication settings
command masks;
other parameters (modem type,
telephone number, handshaking,
modem protocol, password)
reserved for later use.
slave address: 20H to F8H in
increments of 8H;
interface:
0 = RS232 simplified,
1 = RS232 complete
(not implemented),
2 = RS485;
The COM1 and COM2
communication ports can be
configured as follows:
data rate: 1200, 2400, 4800,
9600 Baud;
data bits: 8 (always);
parity: none, odd, even;
stop bits: 1 or 2;
Location of the "GTCZ" and "GT2Z" boards in the cubicle electronics
Acquisition
Status
Test channel
(only in rectifier-inverter cubicle)
(only in rectifier-inverter cubicle)
(in all cubicles)
Acquisition
Status
Test channel
Commands
Status
Test channel
INTERNAL BUS
CRIZ
CROZ
AROZ
GTCZ
RAUZ 1
COM1
COM2
Soft Tunor
SRIZ
GT2Z
RAUZ 2
COM1
COM2
Acquisition
Status
Test channel
Commands
Acquisition
Status
Test channel
Acquisition
Status
Test channel