Filter
Top Products
Installation
990-4053
Installation Guide APC Silcon 480kW 400V UPS 7
3.0 Installation
3.1 Requirements on Site
All system parts are accessible from front or top of UPS. Cable entries are accessible from
bottom. A 1m free space on all sides should be allowed during installation. Once the system is
installed it may be placed close to walls as long as free space is allowed for system doors to open.
(Per applicable national and/or local codes.)
For ventilation and service purposes allow for free space of minimum 1m above the unit or per
national and/or local codes and in front of UPS. Never install systems in direct sunlight.
3.1.1 Cabinet Dimensions
Cabinet
NOTICE!
For reliability reasons do not stand on the UPS. keep the UPS cabinet surface free of any objects.
UPS Height [mm] Width [mm] Depth [mm]
320kW 1800 1600 800
480 1800 1900 800
480kW
1900 mm wide
1800 mm
APC Isolation
Transformer Module
320-480kW
1600 mm wide
1800 mm