APC ACRC500 Power Supply User Manual


 
21InRow RC/RD/RP (600 mm) User’s Guide
Compressor drive status (ACRD500 and ACRP100 cooling units)
View the following information about each cooling unit:
• Speed
• Power
Voltage
Current
• DC Link Voltage
Heat Sink Temperature
Control Card Temperature
Warning Status
Alarm Status
Identification
The Unit tab’s left navigation menu option Identification displays the following read-only information
about each unit:
Model Number
• Serial Number
Controller Firmware
Hardware Revision
Date of Manufacture
You can also configure the following identification information:
Unit ID—Assign the unit a number from 1 to 12. The Unit ID must be unique for each cooling
unit within the cooling group.
Name—Enter a name (up to 20 alphanumeric characters) for the unit.
Location—Enter the location (up to 20 alphanumeric characters) of the unit.
Click Apply to save your changes.
Run hours
View the run hours of the unit components. To reset the run hours, select the unit components to set to
zero and click Apply.