APC ACRP100 Power Supply User Manual


 
InRow RC/RD/RP (600 mm) User’s Guide32
Administration: Security
Local Users
Permission levels
Before you configure user access, be sure you understand the capabilities of each account type
(Administrator, Device User, and Read-Only User) to use menus, view information, and change settings.
Setting user access
You set the user name and password for each of the account types in the same manner.
User name. The case-sensitive user name (maximum of 10 characters) is used by Administrators and
Device Users to log on at the control console, display interface, or Web interface and by the Read-Only
User to log on at the Web interface. Default values are apc for Administrator, device for Device Users,
and readonly for the Read-Only User.
Password. The case-sensitive password (maximum of 10 characters) is used to log on to the Web
interface, (except for the Read-Only User) the control console, or the display interface. The default
setting for Password is apc for Administrators, Device Users, and Read-Only Users.
For information on user permission levels for each account type (Administrator, Device
User, and Read-Only User), see “Types of user accounts” on page 3.