Filter
Top Products
APC Step-Down Transformer User Manual 3
Introduction
Introduction
The APC
®
step-down transformers are used to convert a higher input voltage (208-200 V) to a lower output
voltage (120-100 V) which might be more fitting for certain environments or system configurations.
Note: Illustrations in this document may vary from your actual configuration.
Unpacking
Read the Safety Guide before installation.
Note: The model and serial numbers are located on a small, rear panel label. For some models, an additional
label is located behind the front bezel.
Inspect the transformer upon receipt. Notify the carrier and dealer if there is damage.
The packaging is recyclable; save it for reuse or dispose of it properly.
Check the package contents:
Environmental Specifications
This unit is designed for indoor use only. Do not operate the unit where there is excessive dust.
• Transformer
• Three front bezel kits
• Rail kit
• Literature kit containing:
• Product documentation
• User Manuals CD
• Safety information
• Warranty information
Temperature
32° to 104° F (0° to 40° C)
Humidity
0 to 95% relative humidity, non-condensing
95 lb
(43 kg)
The unit is heavy. Select a location sturdy enough to handle the weight.