Filter
Top Products
5
Wiring
Install an approved 20 A high-magnetic utility circuit breaker.
1. Refer to the diagram below for wiring details.
• Connect the black and white wires from the incoming utility line.
• Route the power feed coax to the bottom of the enclosure and attach to the coax cable
adapter using a pin connector.
• Attach the stinger lug to the pin connector center pin.
• Attach suitable solid copper ground wire to the enclosure ground lug and ground in
accordance with local codes.
• Check for voltages between each connector pin and ground using a multimeter.
Presence of voltage indicates an improper ground. If voltage is present ensure the
ground contact is secure.
• Reinstall the panels on the CTFLE.
Connect the CTFLM
Refer to the User Manual 990-5501 packaged with the CTFLM for connecting and operating
instructions.