APC LX Power Supply User Manual


 
CSI SECTION 16611 STATIC UNINTERRUPTIBLE SYSTEM
CSI SECTION 16611 STATIC UNINTERRUPTIBLE SYSTEM
15. Need Battery Replacement
16. The Redundant Intelligence Module is in control
17. UPS Fault
18. On Battery
19. Shutdown or unable to transfer to battery due to overload
20. Load Shutdown from Bypass. Input Frequency Volts outside limits
21. Fault, Internal Temp exceeded system normal limits
22. Input Circuit Breaker Open
23. System level fan failed
24. Bad Battery Module
25. Bad Power Module
26. Intelligence Module is installed and failed
27. Redundant Intelligence Module is installed and failed
28. Redundancy has been lost
29. Redundancy is below alarm threshold
30. Runtime is below alarm threshold
31. Load is above alarm threshold
32. Load is no longer above alarm Threshold
33. Minimum Runtime restored
34. Bypass is not in range (either frequency or voltage)
35. Bypass contactor stuck in OFF position
36. Bypass contactor stuck in ON position
37. UPS in Bypass due to Internal Fault
38. UPS in Bypass due to overload
39. Low Battery Shutdown
40. Low Battery Warning