Filter
Top Products
- 6 -
Side Panel Controls and Indicators
The side panel connectors for the C3 Power Filter are detailed in Figure 4.
Each numbered callout refers to a corresponding numbered description found
in the following pages.
Figure 4. C3 Side Panel Connectors
Surge Protected COAX/RF Connectors
The C3 provides surge protection for your CATV system, cable
modem, DSS, or antenna system. The surge protection feature pre-
vents surges traveling over coaxial data lines from damaging the
system.
Connect the coaxial cable from the CATV or Cable Modem pro-
vider to the connector marked
IN.
Connect the other coaxial cable from the connector marked
OUT to
the device being protected (CATV box or cable modem).
Circuit Breaker
The C3 also provides a
PRESS-TO-RESET circuit breaker. When
this breaker is “tripped” due to an electrical surge or overload, the
device pops out and shuts down output power to the outlets. To
reset the circuit breaker, push the circuit breaker straight in.
CAUTION: When resetting the circuit breaker, push the button in
quickly, and release the button. Do not hold the button in. Failure to
comply with these instructions may result in equipment damage.
1
2
3
1
4
4
1
2