Filter
Top Products
Storage, Transport, and Service
10 Smart-UPS RT SURTA48XLBP/SURTA48XLBPJ External Battery Pack User Manual
Refer to the “Troubleshooting” section in the UPS user manual to solve minor battery pack or UPS
installation and operation problems. Refer to www.apc.com with complex battery pack or UPS
problems.
Storage, Transport, and Service
Storage
Store the battery pack covered in a cool, dry location with the battery modules fully charged.
At 5° to 113° F (–15° to 45° C), charge the battery modules every six months.
To Install a Replacement Battery
This battery pack has easy-to-replace, hot-swappable battery modules. Replacement is a safe proce-
dure, isolated from electrical hazards. You may leave the UPS and connected equipment on during the
replacement procedure.
Refer to the appropriate replacement battery user manual for battery installation instructions. See your
dealer or contact APC at www.apc.com for information on replacement battery modules.
Transporting the Battery Pack to Another Location
Perform these steps before transporting the battery pack to another location.
1. Disconnect the green/yellow ground wire attached to the battery pack to be transported.
2. Disconnect the battery pack connector cable plug from the connector receptacle(s) .
Caution
Once the battery modules are disconnected, the connected equipment is not
protected from power outages.
Be sure to deliver the spent battery(s) to a recycling facility or ship it to APC in
the replacement battery packing material.
Pb
Pb
T
V
SS
GND
T
V
SS
GND
T
V
SS
GND