APC SYBT2 Power Supply User Manual


 
3
Recycling of Batteries
See your dealer or Replacing Modules in the SYMMETRA RM OPERATION MANUAL, for information on
replacement battery kits and battery recycling.
Do not install the battery module(s) in the frame until you are ready to power up the
Symmetra RM. Failure to so can result in a deep discharge of the batteries, which may
cause permanent damage.
Store the battery module(s) in a cool ambient temperature of < 25 °
°°
°C.
Radio Frequency Interference
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
Shielded signal cables must be used with this product to ensure compliance with the Class A FCC limits.