Filter
Top Products
2
- PowerBook (FireWire) Keyboard
Removing the Installed Keyboard
To replace the keyboard in your PowerBook, follow these steps:
1 Place your computer on a clean, flat surface.
2 Shut down your computer, remove the battery from the expansion bay,
and disconnect the power adapter, modem, and any other cables
connected to the computer.
Warning: Always turn off your computer before opening it to avoid
damaging its internal components.
Warning: The internal components of your PowerBook may be hot.
If you have been using your PowerBook, wait 30 minutes after
shutting down your computer to let the internal components cool
down before continuing.
3 Make sure that the keyboard locking screw is not in the locked position.
Your new PowerBook comes with the keyboard unlocked, so unless you
or someone else locked the keyboard, you can skip this step.
®