Filter
Top Products
iBook Keyboard -
5
Installing the Replacement Keyboard
Refer to the illustrations on the previous pages to complete these steps.
1 Place the new keyboard upside down on the trackpad and palm rests.
2 Carefully align the keyboard cable connector pins to the connector on
the logic board. With the pins properly aligned, press down on the
connector to connect the keyboard cable to the logic board.
3 Replace the RAM shield and secure it with the two screws.
4 Reinstall the AirPort Card, if used, into its connector, and secure it with
the wire bracket. Ensure the antenna cable is tucked out of the way.
5 Flip the keyboard right side up, and secure it with the two plastic tabs.
6 Turn over the computer and reinstall the battery. Secure the battery
door. Turn your computer upright and reconnect all cables.
7 Restart your computer.
Warning: Never turn on your computer unless all of its internal
and external parts are in place and it is closed. Operating the
computer when it is open or missing parts can damage your
computer or cause injury.
Cable Loop
Connector Pins