Filter
Top Products
Opening the computer
1Shut down your computer by choosing Shut Down from the Special menu.
You can also press the Power key on the keyboard.
2Unplug all the cables except the power cord from your computer.
Leaving the power cord plugged in helps protect the computer from
electrostatic discharge.
IMPORTANT
To avo id generating static electricity that may damage
components, do not walk around the room until you have completed the
installation of the expansion card and closed the computer. Additionally, move
the logic board as little as possible while it is outside the computer case.
3Place your thumbs on the two tabs at the top of the computer’s back panel, and press
down.
4Pulling gently, swing the panel down, and slip it out.
Remove the back panel.
93
Installing an Expansion Card