Filter
Top Products
5 Remove the plastic cap from the port on the back of the scanner and put it in a
safe place.
6Plug the cable from the document feeder into the small port on the back of the scanner.
7Switch on the scanner and then switch on your Macintosh.
The scanner makes some sounds as it warms up. After about 20 seconds, the
document feeder and scanner are ready to use.
Automatic Document Feeder at a glance
Paper-height limit mark
Paper-size mark
Document tray
Document exit tray
Document guide
Document
feeder cover
Document
feeder
connector
cable
Attachment brackets
Remove the
plastic cap.
Insert the
connector
cable.
116
Chapter 9