Filter
Top Products
Connecting to twisted-pair Ethernet
Follow this procedure to connect the server to a network that implements
Ethernet over twisted-pair cable. The hardware connection requires a twisted-
pair patch cord with an RJ-45 telephone-style connector jack. You plug the
patch cord into a standard wall plate that is connected to a centralized
10BASE-T hub.
To connect the server to a twisted-pair network:
1 Make sure that the server is turned off.
2 Plug one end of the twisted-pair patch cord into an RJ-45 wall outlet that supports
twisted-pair Ethernet.
3 Plug the other end of the twisted-pair patch cord into the 10BASE-T Ethernet port on
the server.
The server is preset to use the network software connection for Ethernet. You
can use network services as soon as you start up the server.
Ethernet port
(10BASE-T)
3-meter patch cord
Wall plate
10BASE-T hub
Connecting to an Ethernet network 21