Filter
Top Products
Power Mac G4 ATA Hard Drive -
9
3. Connect the cables to the drives.
4. Rotate the drive, and align the carrier pegs with the notches in the chassis. Press the
carrier in and down until the mounting pegs engage and the left side lever clicks into
place.
(Figure 12)
Figure 12
Closing the Computer
1. Raise the side access panel, lift the latch, and press the panel against the case until it
snaps securely into place.
2. Reconnect all cables and restart your computer.
Warning: Never turn on your computer unless all of its internal and external
parts are in place and it is closed. Operating the computer when it is open or
missing parts can damage your computer or cause injury.