Apple PCI-E x8 Network Card User Manual


 
© 2006, 2008 Apple Inc. All rights reserved.
073-1092 Rev. B 6
Closing the Xserve
Replace and secure the cover.1.
Slide the Xserve back into the rack, and tighten the front thumbscrews to secure the Xserve 2.
in the rack.
If the server case was locked, use the enclosure key to lock the security lock on the front 3.
panel.
Congurethecard. 4.
•TocongureanEthernetcard,opentheNetworkpaneofSystemPreferences.
•TocongureaFibreChannelcard,openFibreChannelUtility.
•TocongureaSCSIcard,openDiskUtility.
Warning: Never turn on the server unless all of its internal and external parts are in place
and it is closed. Operating the server when it is open or missing parts can damage it or
cause injury.
AppleInc.
© 2006, 2008 Apple Inc. All rights reserved.
Under the copyright laws, this document may not be copied, in whole or in part, without the
written consent of Apple.
Everyeorthasbeenmadetoensurethattheinformationinthisdocumentisaccurate.Appleis
not responsible for printing or clerical errors.
Apple
1InniteLoop
Cupertino, CA 95014-2084
USA
+ 1 408 996 1010
http://www.apple.com
Apple, the Apple logo, Mac, Macintosh, and Xserve are trademarks of Apple Inc., registered in the
U.S. and other countries.