![](http://pdfasset.owneriq.net/2/6c/26cd8b59-bef6-4028-93be-52258806b4b4/26cd8b59-bef6-4028-93be-52258806b4b4-bg67.png)
Additional Procedures Reset Logic Board - 10
4 Press the computer’s
power-on button. Verify
that the power supply
cable is disconnected
from the logic board.
Wait 5–10 minutes and
then:
• Replace battery
• Reassemble computer
Note
: Make sure the battery
in installed in the correct
+/- direction.
Note
: This procedure resets
PRAM. Be sure to check the
computer’s time/date and
other PRAM settings.
Power-on
Button
Power Supply
Connector