Filter
Top Products
69 AIMB-256 User Manual
Chapter 2 BIOS Setup
2.2.5.1 Security
The security menu items allow you to change the system security settings. Select an
item then press <Enter> to display the configuration options.
! Supervisor / User Password
The Supervisor/User Password item on top of the screen shows the default Not
Installed. After you set a password, this item shows Installed.
! Change User Password
Select this item to set or change the Supervisor/User Password.
1. Select the Change Supervisor/User Password item and press <Enter>
2. From the password box, type a password composed of at least six letters
and/or number, the press <Enter>.
3. Confirm the password when prompted.
The message “Password Installed” appears after you successfully set your pass-
word.
To clear the supervisor/user password, select the change Supervisor/User Password
then press <Enter>. The message “Password Uninstalled” appears.
After you have set a supervisor password, the other items appear to Allows you to
change other security settings.