Filter
Top Products
12
User Manual Addendum
3.3 WEP Security Settings Screen
Most internal LAN traffic does not require additional security meas-
ures. If you are transferring sensitive files or other material over the
wireless LAN, you may enable the WEP Security Settings. WEP
stands for "Wired Equivalent Protocol".
3.3.1 Configuring the WEP Security Settings
Follow the instructions below to configure the WEP Security feature:
1. Click on either the "Enable IEEE 64-bit Shared Key Security"
button or the "Enable IEEE 128-bit Shared Key Security to
save your changes.
Note: Most wireless network cards utilize the 64-bit algorithm.
2. Enter either a 26 or 10 digit number into the WEP Key 1 field.
Click the Apply New WEP Security Options button to save
your changes.