Filter
Top Products
77 Chapter 4
N/A
“PARITY ERROR AT UNKNOWN
LOCATION”
Parity error during memory test at unknown
location.
N/A “PARITY ERROR AT LOCATION
XXXXXX”
Parity error during memory test at the
indicated location.
N/A “NO INTERRUPTS FROM TIMER
0”
Timer 0 of the clock timer controller does
not generate system interrupts correctly.
N/A “UNEXPECTED AMOUNT OF
MEMORY - RUN SCU”
The system memory size does not match
with the CMOS record.
N/A “CLOCK NOT TICKING
CORRECTLY”
The system clock does not working
correctly.
N/A “TIME/DATA CORRUPT - RUN
SCU”
The time/date information in CMOS is
invalid.
N/A “MACHINE IS LOCKED - TURN
KEY”
The keyboard operation is locked.
N/A “BOOT SECTOR 0 HAS
CHANGED”
The boot sector of the hard disk has been
changed, probably because of a virus
attack.
N/A Suspend-to-Disk partition
MISSING!”
No Suspend-to-Disk partition found.
N/A “Hard Disk ERROR!” Access to the Suspend-to-Disk partition
failed.
N/A “Suspend-to-Disk partition
signature NOT FOUND!”
No Suspend-to-Disk partition signature
found.
N/A “Suspend-to-Disk partition size
TOO SMALL!”
The capacity of the Suspend-to-Disk
partition is not enough.
N/A “MEMORY SIZE HAS CHANGED
-- REBOOTING”
The memory size has changed after
previous Suspend-to-Disk operation.
Beep Code Message Description