Chapter 2 29
Main
The Main screen allows the user to set the system time and date as well as enable and disable boot options
and recovery.
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter Description Format/Option
System Time Sets the system time. The hours are displayed with 24-
hour format.
Format: HH:MM:SS
(hour:minute:second)
System Date Sets the system date. Format MM/DD/YYYY
(month/day/year)
Total Memory
Displays the total memory available.
N/A
Video Memory
Displays the available memory for Video.
N/A
Quiet Boot The notebook displays an illustration called the OEM
screen during system boot instead of the traditional
POST screen that displays the normal diagnostic
messages.
Option: Enabled or
Disabled
Network Boot Enables, disables the system boot from LAN (remote
server).
Option: Enabled or
Disabled
F12 Boot Menu Enables, disables Boot Menu during POST. Option: Enabled or
Disabled
D2D Recovery Enables, disables D2D Recovery function. The function
allows the user to restore the system to factory defaults.
Option: Enabled or
Disabled
SATA Mode Control the mode in which the SATA controller should
operate.
Option: AHCI Mode or IDE
Mode
Item Specific Help
This is the help for the
hour field. Valid range
is from 0 to 23.
INCREASE/REDUCE
: F5/F6.
F1
ESC
Help
Exit
Select Item
Select Menu
Change Values
Select SubMenu
Enter
F9
F10
Setup Default
Save and Exit
[08:56:55]
[02/25/2010]
4095 MB
[64 MB]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[AHCI Mode]
[08:56:55]
[02/25/2010]
4095 MB
[64 MB]
[Enabled]
[Enabled]
[Disabled]
[Enabled]
[AHCI Mode]
System Time
System Date
Total Memory:
Video Memory:
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA Mode
System Time
System Date
Total Memory:
Video Memory:
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA Mode
F5/F6
InsydeH20 Setup Utility Rev. 3.5
Boot
Exit
Security
Information
Main