Filter
Top Products
28 Chapter 2
Main
The Main screen allows the user to set the system time and date as well as enable and disable boot option
and recovery.
NOTE: The screen above is for your reference only. Actual values may differ.
The table below describes the parameters in this screen. Settings in boldface are the default and suggested
parameter settings.
Parameter Description Format/Option
System Time Sets the system time. The hours are displayed
with 24-hour format.
Format: HH:MM:SS
(hour:minute:second) System Time
System Date Sets the system date. Format MM/DD/YYYY (month/day/
year)
System Date
System Memory This field reports the memory size of the system.
Memory size is fixed to 640MB
Extended Memory This field reports the memory size of the
extended memory in the system.
Extended Memory size=Total memory size-1MB
Video Memory Shows the video memory size.
Quiet Boot Determines if Customer Logo will be displayed or
not; shows Summary Screen is disabled or
enabled.
Enabled: Customer Logo is displayed, and
Summary Screen is disabled.
Disabled: Customer Logo is not displayed, and
Summary Screen is enabled.
Option:
Enabled or Disabled
Network Boot Enables, disables the system boot from LAN
(remote server).
Option:
Enabled or Disabled
F12 Boot Menu Enables, disables Boot Menu during POST.
Option:
Disabled or Enabled
Item Specific Help
This is the help for the
hour field. Valid range
is from 0 to 23. REDUCE
/INCREASE : F5/F6.
System Time:
System Memory:
Extended Memory:
Video Memory:
System Date:
Quiet Boot
Network Boot
F12 Boot Menu
D2D Recovery
SATA Mode
[]
[]
:53:38
04/07/2009
640 KB
2046 MB
256 MB
14
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[AHCI Mode]
InsydeH20 Setup Utility
Main
Information Security
Boot Exit
Rev. 3.5
F1
Esc
Help
Exit
Select Item
Select Menu
Change Values
Select►Sub-Menu
F5/F6
Enter
F9
F10
Setup Default
Save and Exit