Filter
Top Products
5
1 Jumper for clear CMOS
1 on board buzzer
Color management for on board connecter (pls provide proposal)
1 2*10 pin TPM module connector(Reserved)
1 2*4 pin internal speaker header(Reserved)
1 2pin Intrusion Alarm connector(Reserved)
1 2pin OBR header(Reserved)
1 Parallel port connector(Reserved)
2 2pin GPIO connector
Power Supply
Power Supply Mounting Features
Chassis accepts ATX-style power supply
Chasses accepts PS2, PS3 style power supply
Features for internal mounting tab
Location of 4 external mounting holes
Power Supply Electrical Design Feature
400W /300W/250W in stable mode (Acer Assign System Power Unit)
Design for NVidia MCP7A series chipset compatible system
Voltage design should be covered +5V, +3.3V, +12V, +5VSB, -12V (attention to
12V output capability)
Demand for both PFC/Non-PFC solutions (two different quotations are
needed)
Minimum 4 Serial ATA power connector solution should be included (by
default)
Minimum 3 big 4-pin power connector included
Minimum 1 small 4-pin power connector included
PFC version will not provide switch selector for 115/230V AC input but it
should be universal for Europe and China