Filter
Top Products
24
Advanced Setup
The following screen shows the Advanced Setup:
The following table describes the parameters found in this menu.
Parameter Description Options
Quick Boot Allows BIOS to skip certain tests while
booting. This will decrease the time needed
to boot the system
[Enabled],
[Disabled]
1 st Boot Device
2 nd Boot Device
3 rd Boot Device
4 th Boot Device
The item allows you to see the sequence of
boot device where BIOS attempts to load
the disk operation system.
Hard Disk Drive
Optical Drive
Removable Device
Network Device
Specifies the boot device. Priority
sequence from available Hard Drives
Boot up Num-Lock On Select Power-on state for Numlock On,Off
USB Beep Message Enables the beep during USB device
enumeration
[Enabled],
[Disabled]
Quick Boot Enabled
Quiet Boot Enabled
1 st Boot Device WDCWD5000AAJS-22A8
2 nd Boot Device P1-HL-DT-ST DVDRAM
3 rd Boot Device Generic - Compact
4
th Boot Device IBA GE Slot 00C8 v1
Hard Disk Drive Priority Press Enter
Optical Disk Drive Priority Press Enter
Removable Device Priority Press Enter
Network Device Priority Press Enter
Boot up Num-Lock On
USB Beep Message Disabled
Item Help
KLIJ: Move Enter: Select +/-/: Value F10: Save ESC: Exit
F1: General Help F9: Load Default Settings
CMOS Setup Utiliyt – Copyright (c) 1985-2008,American Megatrends, Inc.
Advanced BIOS Features
Allows BIOS to skip certain tests while
booting .This will decrease the time
needed to boot be syetem.