Associated Equipment GM LS1 Scanner User Manual


 
Page 15
Pick a parameter from the drop-down list, pick a condition, then enter a value. In the example on the left, all scans
will be shown that contain ignition timing advance greater than 25 degrees. In the example on the right, scans will
be filtered starting when the throttle is over 90% open and stopping when the SPD reaches 70 mph.
When a Filter or Range is active, the button will be highlighted as shown below.
To remove the filter, just press the Filter button again. To step through the log, use the < and > arrow buttons, the
Page Up/Page Down buttons, or drag the scroll bar.
To save a log, after logging data, click the Save button.
Enter a description, then click Save. The Clear button will clear the description. See “Using the Keyboard” above
for more information on entering characters and numbers.
Fwd/Rev
Buttons
Scroll Ba
r