Filter
Top Products
45
Using the Notebook PC 4
Inserting a PC Card (PCMCIA)
1. Press in the toggle eject button and release. The
recessed spring loaded toggle button will ex-
tend when pushed in and released.
2. Press the extended button again to eject the
PC Card. Carefully pull the ejected PC card
out of the socket.
Removing a PC Card (PCMCIA)
To remove the PC card, first remove all cables or adapters attached to the PC card, then double-click the
PC card icon on the Windows taskbar and stop the PC card you want to remove.
Be sure the PC card is
level when inserting.
1. If there is a PC Card socket protector, remove it
using the “Removing a PC Card” instructions be-
low.
2. Insert the PC card with the connector side first and
label side up. Standard PC cards will be flush with
the Notebook PC when fully inserted.
3. Carefully connect any cables or adapters needed
by the PC card. Usually connectors can only be in-
serted in one orientation. Look for a sticker, icon,
or marking on one side of the connector represent-
ing the top side.