Asus 810 Computer Hardware User Manual


 
ASUS MEW-L Users Manual56
4. BIOS SETUP
4. BIOS SETUP
Other options for Type: are:
[CD-ROM] - for IDE CD-ROM drives
[LS-120] - for LS-120 compatible floppy disk drives
[ZIP-100] - for ZIP-100 compatible disk drives
[MO] - for IDE magneto optical disk drives
[Other ATAPI Device] - for IDE devices not listed here
After using the legend keys to make your selections on this sub-menu, press
the <Esc> key to exit back to the Main menu. When the Main menu ap-
pears, you will notice that the drive size appear in the field for the hard disk
drive that you just configured.
Language [English]
This allows selection of the BIOS displayed language. Currently only English
is available.
Supervisor Password [Disabled], User Password [Disabled]
These fields allow you to set the passwords. To set any of the passwords, highlight
the appropriate field and press <Enter>.
Type in a password and press <Enter>. You can type up to eight alphanumeric char-
acters. Symbols and other keys are ignored. To confirm the password, type the pass-
word again and press the <Enter>. The password is now set to [Enabled]. This pass-
word allows full access to the BIOS Setup menus.
To clear the password, highlight this field and press <Enter>. The same dialog box
as above will appear. Press <Enter> and the password will be set to [Disabled].
A Note about Passwords
The BIOS Setup program allows you to specify passwords in the Main menu. The
passwords control access to the BIOS during system startup. The passwords are not
case sensitive. In other words, it makes no difference whether you enter a password
using upper or lowercase letters.
The BIOS Setup program allows you to specify two separate passwords: a Supervisor
password and a User password. When disabled, anyone may access all BIOS Setup
program functions. When enabled, the Supervisor password is required for entering
the BIOS Setup program and having full access to all Security menu options.
Main Menu