ASUS A7M266-D User’s Manual 29
3. HARDWARE SETUP
Connectors
3. H/W SETUP
5) Audio Port Connectors (Three 1/8” GAME_AUDIO) (optional)
Line Out (lime) can be connected to headphones or preferably powered speak-
ers. Line In (light blue) allows tape players or other audio sources to be re-
corded by your computer or played through the Line Out (lime). Mic (pink)
allows microphones to be connected for inputting voice.
NOTE: (Only on model with onboard PCI audio) To set up a four speaker
system, connect rear side speakers to the Line In connector and enable the C-
Media 4-speaker function (see 6.4.2 Enabling 4-Speaker Function).
6) Floppy Disk Drive Connector (34-1 pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After connect-
ing the single end to the board, connect the two plugs on the other end to the
floppy drives. (Pin 5 is removed to prevent inserting in the wrong orienta-
tion when using ribbon cables with pin 5 plugged).
®
A7M266-D
A7M266-D Floppy Disk Drive Connector
NOTE: Orient the red markings on
the floppy ribbon cable to
PIN 1
PIN 1
MicLine InLine Out
1/8" Stereo Audio Connectors