Asus A7M266-D Computer Hardware User Manual


 
ASUS A7M266-D Users Manual 55
4. BIOS SETUP
4. BIOS SETUP
Advanced Menu
System Performance [Normal Mode]
The default setting, [Normal Mode], seeks to balance optimal performance
with system stability. To optimize the performance of motherboard circuits
and the CPU, changing the setting to [Turbo Mode] tells the clock generator
to increase the frequency to the DDR RAM memory system. Configuration
options: [Normal Mode] [Turbo Mode]
Spread Spectrum Control [Enabled]
Leave on default setting. Spread spectrum typically reduces system electro-
magnetic interference (EMI) by 8dB to 10dB.
CPU Level 1 Cache, CPU Level 2 Cache [Enabled]
These fields allow you to choose from the default of [Enabled] or choose
[Disabled] to turn on or off the CPUs Level 1 and Level 2 built-in cache.
Configuration options: [Disabled] [Enabled]
BIOS Update [Enabled]
This functions as an update loader integrated into the BIOS to supply the
processor with the required data. In the default position of [Enabled], the
BIOS will load the update on all processors during system bootup. Configu-
ration options: [Disabled] [Enabled]
PS/2 Mouse Function Control [Auto]
The default of [Auto] allows the system to detect a PS/2 mouse on startup.
If detected, IRQ12 will be used for the PS/2 mouse. IRQ12 will be reserved
for expansion cards only if a PS/2 mouse is not detected. [Enabled] will
always reserve IRQ12, whether on startup a PS/2 mouse is detected or not.
Configuration options: [Enabled] [Auto]
USB Legacy Support [Auto]
This motherboard supports Universal Serial Bus (USB) devices. The de-
fault of [Auto] allows the system to detect a USB device at startup. If de-
tected, the USB controller legacy mode is enabled. If not detected, the USB
controller legacy mode is disabled. When you set this field to [Disabled],
the USB controller legacy mode is disabled whether or not you are using a
USB device. Configuration options: [Disabled] [Enabled] [Auto]
OS/2 Onboard Memory > 64M [Disabled]
When using OS/2 operating systems with installed DRAM of greater than
64MB, you need to set this option to [Enabled]; otherwise, leave this on
[Disabled]. Configuration options: [Disabled] [Enabled]