Filter
Top Products
ASUS A7N266-VM motherboard user guide
31
18) USB Headers (10-1 pin USB23, USB45)
If the USB port connectors on the back panel are inadequate, two USB
headers are available for four additional USB port connectors. Connect a 2-
port USB connector set to a USB header and mount the USB bracket to an
open slot in the chassis. (The USB connector set is optional and does not
come with the motherboard package.)
A7N266-VM
®
A7N266-VM Front Panel USB Headers
USB23USB45
USB Power
USBP2–
USBP2+
GND
NC
USB Power
USBP3–
USBP3+
GND
15
610
USB Power
USBP4–
USBP4+
GND
NC
USB Power
USBP5–
USBP5+
GND
15
610
A7N266-VM
®
Front View Back View
+5V
IRTX
IRRX
(NC)
GND
+5V
IRRX
IRTX
GND
IR
1
A7N266-VM Infrared Module Connector
19) Infrared module connector (5-1 pin IR)
This connector supports an optional wireless transmitting and receiving
infrared module. This module mounts to a small opening on system chassis
that support this feature. You must also configure the UART2 Use As
parameter in BIOS to set UART2 for use with IR. See section “4.4.2 I/O
Device Configuration” for details.
Use the five pins as shown in Back View and connect a ribbon cable from the
module to the motherboard SIR connector according to the pin definitions.