Filter
Top Products
42
Chapter 2: Hardware information
23) Line-out Selector Jumpers (4 pin BACK_LT / BACK_RT)
By default, these jumpers are shorted (jumpers on) to route the signal from
the audio controller to the rear panel Line Out jack to make it available for
audio out devices such as speakers or a headphone. If you connect the Intel
Front Panel audio cable to the IPANEL connector (see next page), then
remove the caps from these two jumpers to permit automatic switching of
audio signals between the rear panel Line Out jack and the Intel audio cable.
A7V333
®
A7V333 LINE_IN Connector
LINE_IN
AGND
BLINE_LIN_L
ALINE_LIN_L
BLINE_IN_R
LINE_IN_R
A7V333
®
A7V333 Internal Line Out Connectors
BACK_LT
BLOL
FLOL
BLOR
FLOR
BACK_RT
24) Audio Input Line In Header (LINE_IN)
This connector suports audio input on left and right stereo audio channels.
NOTE: The motherboard ships with Jumper caps over pins 1-2 and 4-5.
Remove them only when making audio input connections.