Filter
Top Products
ASUS A7V333 motherboard user guide
67
Onboard PCI IDE Controller [Both]
This field allows you to enable either the primary IDE channel or secondary
IDE channel, or both. You can also set both channels to [Disabled].
Configuration options: [Both] [Primary] [Secondary] [Disabled]
S2K Bus Driving Strength [Auto]
This item controls the host bus between the AMD K7 processor and the
north bridge. Configuration options: [Auto] [Manual]
S2K Strobe P Control [2]
S2K Strobe N Control [3]
Useful test parameters. Configuration options: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A,
B, C, D, E, F ]
DQS Driving Strength [Auto]
The DQS items are DRAM data strobes. The setting of “driving strengths”
determines the strength of electrical current to the DRAM. They are useful
test parameters. Configuration options: [Auto] [Manual]
DQS P Contol [2]
DQS N Contol [E]
Useful test parameters. Configuration options: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A,
B, C, D, E, F ]
DQS output delay contol [Auto]
Useful test parameters. Configuration options: [Auto] [Manual]
DQS output delay 4MSB [E]
DQS output delay 4LSB [2]
Useful test parameters. Configuration options: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A,
B, C, D, E, F ]
DQS input delay contol [Auto]
Useful test parameters. Configuration options: [Auto] [Manual]
DQS input delay 4MSB [E]
DQS input delay 4LSB [2]
Useful test parameters. Configuration options: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A,
B, C, D, E, F ]
DRAM Burst Length [4]
This item controls the pulse signal for DDR commands. The [Disabled]
default is equivalent to 2T and enabled, to 1T. Configuration options:
[Disabled] [Enabled] [Auto]