Filter
Top Products
4-8
Chapter 4: Software support
Chapter 4
4.3.5 USB 3.0 Boost
USB 3.0 Boost technology supports UASP (USB Attached SCSI Protocol) and automatically
speeds up the transfer rates of your USB storage devices.
Launching USB 3.0 Boost
To launch USB 3.0 Boost, click or tap on the top-right corner of the menu, then click
USB 3.0 Boost on the AI Suite 3 main menu bar.
Using the USB 3.0 Boost
1. Connect your USB 3.0 device to the USB 3.0 port.
2. From the USB 3.0 Boost screen, select a USB device.
3. To enable UASP on your USB device, click
UASP. To revert to its normal transfer rate,
click Normal.
• Refer to the software manual in the support DVD or visit the ASUS website at
www.asus.com for detailed software conguration.
• Use USB 3.0 devices for better performance. Data transfer speed varies with USB
devices.
Click to select a USB device
Click to enable the USB
device’s normal data
transfer rate
Click to enable UASP or
Turbo Mode to the USB
device for a faster data
transfer rate
USB 3.0 Boost screen