ASUS A88X-PRO 2-33
Chapter 2
4. Digital audio connector (4-1 pin SPDIF_OUT)
This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port. Connect
the S/PDIF Out module cable to this connector, then install the module to a slot opening
at the back of the system chassis.
The S/PDIF module is purchased separately.
5. CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1/2/3/4)
Connect the fan cables to the fan connectors on the motherboard, ensuring that the black
wire of each cable matches the ground pin of the connector.
Do not forget to connect the fan cables to the fan connectors. Insufcient air ow inside the
system may damage the motherboard components. These are not jumpers! Do not place
jumper caps on the fan connectors!
The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power.
A88X-PRO
A88X-PRO Digital audio connector
SPDIF_OUT
+5V
SPDIFOUT
GND
CHA_FAN4
VCC
CHA FAN IN
CHA FAN PWR
GND
CHA_FAN3
VCC
CHA FAN IN
CHA FAN PWR
GND
CHA_FAN1
GND
CHA FAN PWR
CHA FAN IN
VCC
CPU_FAN
GND
CPU FAN PWR
CPU FAN IN
CPU FAN PWM
CHA_FAN2
VCC
CPU FAN IN
CPU FAN PWR
GND
1
1
2
5
3
4
2
3
4
5
A88X-PRO
A88X-PRO Fan connectors