Filter
Top Products
8
DC+5V/2A ResetLine Console USB 10/100-BaseTPhone
HUB PC
1 2 3 4 65 7
1. DC +5V/2A Power Input Jack
The provided power adapter converts AC power to DC power for use with this jack. Power
supplied through this jack will supply power to the ADSL Modem.
2. Line Connector
The RJ-11 connector allows ADSL data communication between the modem and the
PSTN through a twisted-pair phone wire.
3. Console Port
The 9-pin D-sub serial port supports the RS-232 terminal interface for advanced ADSL
modem management.
4. Reset Switch
The reset button, when pressed, resets the modem without the need to unplug the power cord.
5. USB Port (optional)
The optional USB port allows the modem to be connected to your computer through the
USB interface.
6. 10/100-BaseT Ethernet Port
The RJ-45 Ethernet port supports 10Base-T networks. (100Base-TX networks will be
supported in the near future.) This port allows your PC or Ethernet hub to be connected to
the ADSL Modem through a Cat. 5 Ethernet cable.
3. Installing the ADSL Modem
3.2 Rear Panel