Filter
Top Products
30 Chapter 2: Hardware Setup
2.7 Replace the Covers
Re-install the Panel
1. Align the bottom edge of the
panel to the chassis.
2. Firmly push the panel with both
hands until it fits in place.
3. Open the panel door.
4. Secure the panel with the two
screws that you removed
earlier.
5. Lock the front panel with the
system key.
Re-install the Cover
1. Place the cover from the top of
the chassis, leaving about an
inch from the rear edge.
2. Slide the cover toward the rear
panel until it fits in place.
NOTE
If you are installing optional components such as the IDE
RAID kit, proceed to Chapter 4 before replacing the covers.