Filter
Top Products
Chapter 2
10 ASUS WLAN Card
Chapter 2 - Installation
Installation
Configuring with the WLAN utility (Infrastructure)
Use ASUS WLAN utlity to get connected with an existing wireless network.
6. Check the
Connection
tab to see the
signal strength. Click
OK
to exit the utility.
5. Check the
Status
page to see the
association state. If connection is
established, the box shows “Connected -
xx:xx:xx:xx:xx:xx”.
3. Use
Site Survey
if you donʼt know the
SSID of your access point(s).
4. Encryption settings must match those
at the access point. Ask your network
administrator about settings if necessary.
Click
Apply
to activate the settings.
1. Right-click the wireless connection icon
and select
Wireless Settings.
2. Chcek the
Config
page to set the
SSID
(network name) to that of your wireless AP.