Asus P2B Mouse User Manual


 
20 ASUS P2B User’s Manual
III. INSTALLATION
CPU
III. INSTALLATION
2. Attach the Heatsink
NOTE: Follow carefully the heatsink attachment instructions included with your
heatsink or processor. The following steps are provided only as a general guide
and may not reflect those for your heatsink.
The URM is now ready for the installation
of your processor.
Installing the Processor
1. Unlock the URM’s Folding Support Arms:
The folding support arms of the URM are
locked when shipped.
SECC with Pentium
®
II
Place the SECC face down on a flat surface
and lay the heat sink flush on the back (metal
side) of the SECC. Check the orientation of
the heatsink against the illustration below.
The thicker fin must be orientated toward the
SECC2 with Pentium
®
II/SEPP with Celeron™
Insert the heatsink clip through the holes at the
SECC2/SEPP’s back, making sure that the bot-
tom of the clip plate sits against the processors’s
back. Remove the tab from the thermal grease,
which is located on the bottom of the heatsink)
Unlocked Folding
Support Arms