Filter
Top Products
WL-500W Wireless Router User Manual
8
PPTP user
If you are using PPTP services, select
ADSL
connection that requires username,
password and IP address.
Fill in the
username, the password and the IP address
provided by your ISP into the fields. Click
Next
to continue.
Static IP user
If you are using ADSL or other connection
type that uses static IP address, select
ADSL
or other connection type that uses static
IP address
. Input the IP address, the subnet
mask, and the default gateway provided by
your ISP. You can specify DNS servers, or
get DNS information automatically.
herk036@adsl-comfort
3. After the connection type setting is
complete, you are to set up your
wireless interface. Specify to your
wireless router an SSID (Service Set
Identifier), which is a unique identifier
attached to packets sent over WLAN.
This identifier emulates a password
when a device attempts to communicate
with your wireless router via WLAN.
If you want to protect transmitted data, select a
Security Level
to enable encryption methods.
Medium:
Only users with the same WEP key settings can connect to your wireless router
and transmit data using 64bits or 128bits WEP key encryption.
High:
Only users with the same WPA pre-shared key settings can connect to your wireless
router and transmit data using TKIP encryption.